 |
| Dressing stone |
|---|
|
MK Diamond's specially formulated 60-grit dressing stone is used to expose new cutting surfaces.
A must for the professional
$ 15 Qty
|
|
|
|
| Electric water pump |
|---|
|
120V water pump
Designed specifically and only for the MK 370 and MK 470
90 gallons per hour
$ 44 Qty
|
|
|
|
| Electric water pump |
|---|
|
120V water pump
Designed for use with all MK tile saws
150 gallons per hour
$ 90 Qty
|
|
|
|
| DISCONTINUED Tile hole cutter |
|---|
|
These zinc-plated tile hole cutters can be adjusted to cut one to three inch holes.
Sorry, the Cutter and Carbide tips are discontinued
$ 25 Qty
|
|
|
|
| 90 degree squaring arm |
|---|
|
Rip guide ensures accurate 90 degree cuts.
Heavy-duty cast aluminum
$ 29 Qty
|
|
|
|
| MK-290 1 3/8 inch tile bit |
|---|
|
The MK-290 Tile Bit is designed to cut clean, smooth 1 3/8 inch holes through all ceramic tile and marble. It can be used wet or dry.
Can be used wet or dry
Cuts 1 3/8" holes
$ 95 Qty
|
|
|
|
| MK-290 1 1/2 inch tile bit |
|---|
|
The MK-290 Tile Bit is designed to cut clean, smooth 1 1/2 inch holes through all ceramic tile and marble.
Can be used wet or dry
Cuts 1 1/2" holes
$ 112 Qty
|
|
|
|
| MK-290 2 1/2 inch tile bit |
|---|
|
The MK-290 Tile Bit is designed to cut clean, smooth 2 1/2 inch holes through all ceramic tile and marble.
Can be used wet or dry
Cuts 2 1/2" holes
$ 193 Qty
|
|
|
|
| Cutting Kit |
|---|
|
The Cutting Kit includes a 90° Protractor, Dressing Stone, Dual 45° Flat Angle Guide, and a large 45° Bullnose Miter.
Collection of MK cutting accessories
$ 155 Qty
|
|
|
|
| Adjustable rip guide |
|---|
|
Adjustable rip guide.
Cast aluminum
$ 20 Qty
|
|
|
|
| Dual 45 degree flat angle guide |
|---|
|
The dual 45 degree flat angle guide, designed to give you a perfect 45 degree flat edge.
Cast aluminum
$ 23 Qty
|
|
|
|
| 90 degree protractor |
|---|
|
The 90 degree protaractor, allows you to cut the perfect angles.
Cast aluminum
$ 32 Qty
|
|
|
|
| 45 degree large bullnose miters |
|---|
|
The large 45 degree Bullnose Miters is designed to give you perfect 45 degree miter edge.
Cast aluminum
$ 53 Qty
|
|
|
|
| Ground fault interrupter |
|---|
|
Ground fault interrupters provide protection from the dangers of electrical hazards.
Added safety
$ 63 Qty
|
|
|
|
| 16 inch Tile cutter |
|---|
|
MK Scor-N-Set 16" Tile Cutter is small enough to hand carry but is still a precision-made professional tool.
Rugged diecast aluminum
Two 1/2" solid chrome plated steel slide rods.
$ 125 Qty
|
|
|
|
| 16 inch Tile cutter replacement wheel |
|---|
|
Replacement wheel for the 16" Scor-N-Set.
Perfect fit
Makes your scor-n-set like new again
$ 11 Qty
|
|
|
|
| Powercord adapter (male to female) |
|---|
|
Male/female powercord adapters.
$ 28 Qty
|
|
|
|
| Powercord adapter (female to male) |
|---|
|
Female/male powercord adapters.
$ 32 Qty
|
|
|
|
| Y-cord |
|---|
|
20 Amp / 125 V Y-cord adapter.
$ 49 Qty
|
|
|
|
| ATS saw stands |
|---|
|
Versatile and highly mobile saw stand with zinc-plated square steel tubing, 10" pneumatic tires, and removable side table.
Fits 101 Series, 880, 1070, 1080, and 2000 series saws.
$ 539 Qty
|
|
|
|
| Folding stand (standard table length) |
|---|
|
This sturdy steel stand allows the operator to have the work surface at a standing height.
Fits MK-101, 101 Pro, 660, 770, and 880.
Also fits the MK-1080 and 2000 series masonry saws.
Does not fit the 101 Pro24, 115 Pro or 1070 which have the larger size tables and require stand 153331
$ 121 Qty
|
|
|
|
| Folding stand (large table size) |
|---|
|
This sturdy stand allows the operator to have the work surface at a standing height.
Fits MK-101 Pro24, 115 Pro & 1070.
$ 147 Qty
|
|
|
|
| BX-4 Folding saw stand |
|---|
|
Designed specifically for the BX-4 saw. Lighweight, strong, versatile.
Fits BX-4
$ 182 Qty
|
|
|
|
| 370 saw stand |
|---|
|
This sturdy steel stand allows the operator to have the work surface at a standing height.
Fits MK 370 tile saw
$ 87 Qty
|
|
|
|
| 370-EXP saw stand |
|---|
|
This sturdy steel stand allows the operator to have the work surface at a standing height.
Fits MK 370-EXP
$ 60 Qty
|
|
|
|
| Water hood cover |
|---|
|
Two-piece water hood helps contain water and reduce water overspray around the work area.
Fits MK-770.
$ 200 Qty
|
|
|
|
| Water hood cover |
|---|
|
Two-piece water hood helps contain water around the work area.
Fits MK-370 and 470 saws.
$ 170 Qty
|
|
|
|
| DISCONTINUED 24 inch tile cutting kit |
|---|
|
MK 101 support fixture that permits 24" straight rip cutting.
Zinc plated
$ 172 Qty
|
|
|
|
| Extra Drain plugs 2-pack |
|---|
|
Water Tray Plug - 2 pack.
MK Diamond markings
Perfect fit
$ 6 Qty
|
|
|
|
| Extra Drain plugs 6-pack |
|---|
|
Water Tray Plug - 6 pack.
MK Diamond markings
Perfect fit
$ 18 Qty
|
|
|
|
| Blade wear gauge |
|---|
|
A diamond blade "wear" measuring tool.
Measures 7" through 24" blades
Caters for 20mm, 3/4" or 5/8" arbor.
$ 194 Qty
|
|
|
|
| MK-10S - 10 inch brick paver blade |
|---|
|
MK-10S is a wet segmented rim masonry blade that provides the optimum choice for expeditiously cutting brick pavers.
for brick pavers
for 10 inch saws
for 1 - 3 hp saws
$ 148 Qty
|
|
|
